2023年6月8日星期四

SKE Ultrasonic Level Switch Sensor for Vessels Ship

 SKE Ultrasonic Level Switch Sensor for Vessels Ship



Advantage:
No Moving Parts 
 Zero Maintenance 
Ignores Condensation on Sensor 
Will Not Sense Foam as Liquid 
Microcontroller-Based Electronics

ultrasonic level sensors are compatible with water-based and hydrocarbon-based liquids, the best solution for Vessels Ship Leakage measurement.



Power supply

24VDC

Standby current

4—5mA

Output current

16±1mA

Sensitivity

5mm

Delay

0.5 seconds

Mounting

3/4 NPT

Sensor material

Titanium Alloy

Temperature

-20℃ to 80℃

Protection grade

IP67

Weight

200g




Working principle

 

The ultrasonic switch is a device that uses an inaudible high-frequency acoustic wave (ultrasonic wave) to detect the presence of liquid at a specified point. The device is composed of electronic control unit and a sensor. The ultrasonic level switch uses the characteristics of sound wave transmission in steam and liquid to detect the liquid level. When sound waves travel through the air, they lose a lot of signal strength. When propagating in a liquid, sound waves retain almost all the signal strength.

 

 




To detect the level, we must determine whether there is liquid or gas (air) in the gap. Because liquids are denser than gases, it is easier to transmit sound waves through them. One side of the sensor gap transmits sound waves and the other side detects sound waves. When liquid is present, a large number of sound waves are received on the detection side. When gas (air) is present, a small amount of sound waves are received. The electronics detect this difference and switch the relay accordingly.

 The ultrasonic switch sensor consists of two piezoelectric crystals, one for transmitting sound waves and the other for receiving sound waves. Each crystal is mounted on one side of the metal sensor gap. The transmitting crystal generates high-frequency sound waves (1MHz to 3MHz) that travel through the gap to the receiver crystal. The receiver crystal converts the received sound energy into an electrical signal, which is processed by electronic equipment to determine whether there is liquid or air in the gap.

Shaanxi Shengke Electronic Technology Co.,Ltd

p:

+86 -29-88858601    m:+86 15809274235

a:

Room 1911, Junminronghe Building,No25 Fazhan Road, Gaoxin Zone, Xi’an City, Shaanxi.China

w:

www.skgauge.com       e: jilina@skgauge.com

2016年3月27日星期日

Shaanxi Shengke Electronic Technology Co.,Ltd non contact chemical liquid level sensor mounted mounted by magnet without flanges www.skgauge.com





Non contact Liquid Level Gauge / no need drilling the tank. Non intrusive easy installation
Power supply: DC 24V
Accuracy: 0.1%
Power: 10W
Signal output: 4-20mA
Communication Protocols:  RS-485 HART MODBUS
Environment temperature: -20-70 degree
Liquid temperature: -50-100 degree
Explosion proof class: ExdIICT6
Protection class: IP67
Jilina Lee
Skype: jilina1986
jilina@skgauge.com
Cell: 0086 15809274235